KEY POINTS
Kempower: up to 120 of 870 jobs cut, about 14%. Second round after about 9% in 2024.
Energy through its chargers, first nine months of 2026: 2.5x a full 2024. Revenue 2024 to 2026E: about +18%.
Energy delivered to date: 2.6 TWh in 62M charging sessions (kempower.com, 15 Nov 2026).
Revenue: €283.6M peak (2023) → €223.7M (2024) → est. €264M (2026).
This week my feed filled up with Kempower people who had just lost their jobs, many of them in the US. Kempower plans to cut up to 120 of its 870 jobs.
It is the second time in two years. So I went back to 2020 to see how Kempower got here.

Kempower at Power2Drive, Munich, June 2026
Who Kempower is

Kempower production sites and lifetime totals, Nov 2026
Kempower is a Finnish DC charger maker, headquartered in Lahti, Finland, with a second factory in Durham, North Carolina, USA.
It was one of the first to go all in on distributed charging: one power unit, several charge points sharing its power.
I think this is where the market is going. And it is not only me saying it. The big names are moving the same way because there is a need for it. Alpitronic has the HYC1000. ABB E-mobility is going almost all in with its newest systems. The Chinese manufacturers are big on distributed too. Kempower was there early.
Now think about where Kempower has traditionally been installed. Alpitronic and ABB E-mobility focused on public DC charging. Kempower took a different path. Logistics depot operators prefer it, because one power unit can feed many vehicles and move the power to the ones that need it.
And you can see that use case in the numbers. In my July post, Kempower delivered 40 kWh per charging session, ahead of Alpitronic (30.2 kWh) and ABB E-mobility (26.8 kWh). Now, in November 2026, it is even higher: 41.9 kWh.

Energy per session, from my LinkedIn post, Jul 2026
Energy through Kempower chargers in the first nine months of 2026 is already 2.5 times a full 2024. Revenue over the same two years: up about 18%. The chargers are being used more than ever. However, they are being bought less. Kempower's own explanation: CPOs are filling the sites they already have before they build new ones.
The rise
In 2020 Kempower had 38 employees and €3.3 million in revenue. It listed in Helsinki in December 2021.
2023 was the absolute peak: 737 employees, €283.6 million in revenue and a 14.3% operating margin. In the first nine months of 2026, that margin was -3.5%.
The US was the next step. In early 2022, Kempower's plan was to start US operations in 2025. In June 2022 the board pulled it forward to the end of 2023. In February 2023 it picked Durham, North Carolina: a $41 million investment, with a target of more than 300 jobs. Production started in November 2023, and the first US-made chargers shipped that December.

Kempower revenue, 2020-2026E
2024: the reset
For 2024, Kempower guided €360 to 410 million. It delivered €223.7 million, 21% less than 2023 and almost 40% below the low end of its own target.
Kempower's own explanation: the component shortage after COVID pushed demand higher than normal, grid connections took longer than planned, and customers ended up with too much stock.
It was not only Kempower. In August 2024, Alpitronic's CEO told WirtschaftsWoche the company had planned for around 80% growth that year. He then expected 10 to 20%. Other major manufacturers went bankrupt or laid people off, some until today, because the recovery has taken so long.
Here is my read of what happened. Every charger maker dreams of working with the big CPOs. The problem: the big CPOs had their warehouses stacked full of chargers. Until recently, I was still seeing chargers built in 2024 being installed in 2026. I filmed one in Karlsruhe in July. That is how big the stock was.
So in 2024 Kempower cut around 80 full-time positions, about 9% of its people at the time, plus temporary layoffs.
Cutting again
Now it is happening again. Up to 120 of 870 jobs, about 14%, with up to 80 of them in Finland. In July the savings target was €5 million a year. Now it is more than €15 million, with full effect by Q3 2027.
And this is not the worst I know. Some other manufacturers have been cutting 10 to 15% of their people every year, for two or three years in a row. Some are even chasing deals their own channel partners used to own.
That is what really perplexes me. I see Kempower more and more at truck charging and depot sites nowadays. Let me give you one example. I know the source, I know the person, and I know this site very well.
A client in Germany, with trucks, vans and cars all charging at one site. One 600 kW power unit, 12 charge points. Nearly 3.5 MWh in a single day was recorded last week.
On paper that might not look so big: about 290 kWh per charge point per day. But look at the other option. Public sites in Germany mostly run on grid, with a simultaneity factor of 0.7 to 0.8, and nearly everyone buys an all-in-one charger of 200 to 400 kW. For 12 charge points, the usual setup is 2 x 400 kW plus 4 x 200 kW, or 6 x 200 kW. That hardware costs more and needs nearly double the grid connection. And the grid connection is the real bottleneck: the biggest cost, and easily 18 months of waiting. On top of that, with all-in-one chargers you have no flexibility.
What do I mean by flexibility? Yesterday I posted about an EnBW site with a 300 kW and a 150 kW charger, four charge points. At the 300 kW charger, a car was charging at 75 kW and the other was already full and still parked and blocking the charge point. At the 150 kW charger, built from two 75 kW power stacks, the car next to the driver sat at 98%, trickling at 6 kW, so the poster got only 74 kW. By the time that car left, the poster was already at 70% and could not take more than 125 kW. Most of the power on site went unused, because it is locked to each charge point.
So the driver who could have charged faster cannot. Others drive up, see every spot taken and leave. Who wins? Nobody.
That is why I always challenge the status quo. I have been a salesperson long enough to know when sales are driven by existing framework agreements, portfolio limitations or revenue targets, because not all customers are equally informed.
That is why I have seen some very weird installations that don't make sense. I am a huge advocate of choosing the right hardware, at the right price, specifically for your use case. If you are about to select chargers or plan a site, reach out to me. I can help you make the right decision. (see below for details)
The challenge in Germany
Kempower sells through partners. In many countries that model is a strength. In Germany, it is also a challenge.
That is the feedback I keep getting from several people here. The hardware performs, but problems show up before the installation, during it and after it, and customers get frustrated, because the partners have their own priorities and interests. In Germany, I think the market could have grown faster.
Kempower, if you are reading this: I have the potential channel partners and contacts to your end customers. I can help you unlock this market. I have built a channel business twice and can help you here as well. (see details below)
So why the losses?
In 2023 Kempower made a €40.6 million operating profit. In 2025 it lost €14.3 million.
The gross margin only slipped from 52% to 48%. The hardware still earns its money. So there has to be something else.
Look at revenue per employee. By my math, it fell from about €385,000 in 2023 to €285,000 in 2024, and was about €305,000 in 2025. Headcount went from 596 to 907 in the twelve months to June 2024, while revenue fell. Too many people for the revenue that came in. Seen that way, the layoffs make sense.
Or was the US move simply badly timed? When the board pulled the US plan forward in June 2022, the CEO pointed to the US national EV charging plan. Under it, the NEVI program was meant to put $5 billion into fast chargers along US highways. My guess: Kempower was counting on that money and sadly NEVI wasn’t successful. Ask Tritium about it. And yet others, like ABB E-mobility and Alpitronic, seem to be doing much better in the US. So maybe it was the strategy too or the go to market as well.
By my math, the new €15 million cost cut is sized to break even at today's revenue.
The hardware won. The buying cycle did not.
Maybe the hiring ran ahead of the market. I do not know what ambitions sat behind it.
There are difficulties. But if Kempower gets its operations and partners right and unlocks the potential that exists in the market, there is a huge and real chance for a comeback.
To everyone affected: you are coming out of one of the best DC charging companies in Europe. Reply to this email or message me on LinkedIn with what you are looking for next. I will share it where I can. I have already received some requests, so if you are hiring top talent, message me and I will share them with you.
And to the Kempower team: I hope this reset brings you back stronger. The hardware deserves it.
Two ways I can help
1. Planning chargers at your site, or selling them?
The right hardware for your use case, at the right price. I sold 400+ DC fast chargers in Germany and have built a database of 600+ DC charger models available in the EU. I also track 135,000+ DC charge points across Europe, so I can tell you exactly where Kempower, ABB, Alpitronic and other manufacturers are installed, and what is being replaced. For example, this is where I have mapped Kempower so far:
2. Want your company's experts seen by buyers?
For EV charging and e-mobility companies. Your brand film shows the product. Your people make buyers trust it.
I help companies get their experts seen and heard by buyers: on LinkedIn, in their own voice, and on camera. On-camera coaching for your leaders, LinkedIn positioning and posts, shoot days at your site, and team workshops. See what I mean on LinkedIn.
For both, email me at [email protected]. The first call is free.
Sources
Kempower financial statement releases 2021 to 2025; half-year report Jan-Jun 2024; interim report Jan-Sep 2026 (4 Nov 2026); inside information 4 Nov 2026, 18 Jul 2024, 2 Sep 2024; company announcement 23 Jun 2022; press releases 10 Nov 2023, 18 Dec 2023: investors.kempower.com/releases
Kempower Annual Report 2025 (production sites)
kempower.com homepage, 15 Nov 2026
NC Governor press release, 7 Feb 2023: governor.nc.gov. NEVI: FHWA memo, 6 Feb 2025; US District Court (W.D. Wash.) preliminary injunction, 24 Jun 2025
electrive.com, "Alpitronic to cut back hypercharger production", 2 Aug 2024 (citing WirtschaftsWoche)
Own tracking of public manufacturer dashboards, Jul 2025 to Nov 2026
Map base: OpenFreeMap / OpenStreetMap contributors; country shapes: Natural Earth (public domain)




